Domestic Subsidiaries

01

Tosçelik Profil ve Sac Endüstrisi A.Ş.

OSMANIYE FLAT STEEL INTEGRATED PRODUCTION FACILITY

Tosyalı Holding completed the installation of its integrated iron-steel complex in Osmaniye in 2009 with a $1 billion investment. The complex in the Osmaniye Organized Industrial Zone comprises a steel mill where liquid steel production is performed, a billet production facility where the input materials for long products are manufactured, a slab production facility where the input materials for flat products are manufactured, a hot sheet rolling mill where hot flat products are manufactured, an oxygen production facility, a dedusting unit, and water treatment plants.

The contract for the facility took form in January 2008, and the first field operations began in early April 2008. The steel mill and billet production facilities completed its first interim production on July 14, 2009. With the hot sheet rolling mill and slab mold facilities starting trial production, all facilities went into operation by the end of November 2009, and our Prime Minister Recep Tayyip Erdoğan held the opening for our facility on February 6, 2010 with a ceremony which close to 3,000 invitees attended.

This investment allows for the manufacture of imported flat steel in Turkey and positively contributes $1 billion to Turkey’s current deficit. Our facility reached annual levels of 1.5 million tons of production with the successful work in the first years of its establishment, and it aims to produce 2 million tons annually in 2012. Tosçelik is among the top five facilities in Turkey in steel production with its production figures from 2010.

The facility is attentive to environmental properties. The dedusting facility will absorb the dust and gas that will spread to the environment with a cost of 20 million euros. Dust emissions materialize at a rate of half the European Union standard at this facility.

This investment was the first flat steel production facility made from scratch by the private sector in the Republic of Turkey.

With the completion of the Osmaniye investments, the Tosyalı Group became the first in Turkey and one of a limited number of facilities around the world that could produce all products under the same roof from raw materials to piping profile, the final product.

ISKENDERUN ERW STEEL PIPING PRODUCTION FACILITIES

ERW welded industrial piping and hollow section production began in 1998 at the company, which foundations were laid in the Iskenderun Organized Industrial Zone in 1997. Our company continues its projects and investments with each passing day and put into operation the Tosçelik Galvanized Piping Production Facility and, in 2007, the Tosçelik Natural Gas Piping Production Facility, whose investment began in 2004 and 2005. It has had industrial piping, water and gas piping, and square, rectangular, and special-segment profiles in its production matrix since 2012.

OSMANIYE ERW STEEL PIPING PRODUCTION FACILITIES

The initial investment for our facility, which has the title of “Largest piping factory established all at once in Europe”, started in late 2010. This investment saw its completion on land of 353,659 square meters in the Osmaniye Organized Industrial Zone, and its first piping production took place in the fourth quarter of 2011. Our company serves domestically and internationally, primarily including the United States, Europe, and the Middle East. It provides an expansive array of services in the sector, adding EPOXY-, PE-, PP-, and PU-coated piping, sensitive and mechanical piping, piping for pressure purposes, and heat-treated piping and profiles to its production matrix with its enormous factory that has the latest production technology. 

More Information
02

Tosyalı Demir Çelik Sanayi A.Ş.

Our facility, whose investment began in 1993, started production in 1994. Equal Angles was added to its production matrix in 1995. The second rolling mill as founded with the investment made in 2001, and its capacity doubled And the product group saw the addition of the IPN-UPN-IPE profile. The Iskenderun Tosyalı Iron-Steel Rolling Mill Facilities were established over a total area of 17,667 square meters, with 13,000 square meters of indoor space. It has a production capacity of 550,000 tons/year.

Our Tosyalı Iron-Steel Facility, performs standard and special painting production:

In the Equal Angles group from 30 mm to 120 mm / up to wall thicknesses of between 2.8 mm and 13 mm,

In the UPN profile group from 50 mm to 160 mm,

In the IPN profile group from 80 mm to 160 mm,

In the IPE profile group from 80 mm to 160 mm.

Our own laboratories perform cast-based tension tests, chemical tests, bending tests, and charpy impact test for all products we manufacture.

We do all quality system documentation monitoring and checking using the QDMS system. The SAP System and our database records all kinds of information belonging to our products. The barcode system on the package labels provides traceability until the product reaches the customer.

Tosyalı Iron Steel manufactures these products by heating section squares #130 and #150 of the billet raw material up to 1250 degrees and produces them through hot shaping between the rolling presses. Hot shaping especially makes these materials, and they gain a more durable structure originating from the homogeneous shrinking of particle sizes.

These materials that we produce find use in all buildings of steel construction, all industries in that conduct machine manufacturing, and in various structures, primarily including energy transmission lines.

More Information
03

Tosçelik Granül San. A.Ş.

We chose the sector’s advanced technological equipment and started production in 2006 at our Tosçelik Granule Factory, for which we laid the foundation in 2006 with the idea that low-carbon steel shot bearings haven’t found the place they deserve in the global steel ball bearing market. We doubled our capacity with the new investment we realized in 2010 with the mission of responding to global steel shot bearing needs. Low-carbon steel shot bearings provide alternative steel abrasives with faster, more environmentalist, and lower-cost operations. With the belief that the advantages of low-carbon steel shot bearings is not adequately known or taken advantage of around the world, our mission is to present to users by producing the highest quality of low-carbon steel shot bearings and to ensure all users benefit from its advantages with our effective and continuous technical support.

We presented to our customers in 2017 our KOTAR products we developed thanks to the detailed R&D work Tosçelik Granule has conducted for a long time. We support our customers having more active sandblasting process management by helping them choose the most suitable products for their processes with out KOTAR products. 

More Information
04

Tosyalı Filmaşin ve İnşaat Demir Ürt. San. A.Ş.

Foundations were laid in 2012 for the Tosyalı Holding Osmaniye Facility, the Wire Rod and Rebar investment with an annual capacity of 600,000 tons. The facility was established over an area of 90,000 square meters and started production in August 2014. Our facility can produce wire rod in the range of Ø5.5-25, rebar in the range of Ø12-Ø32, and ribbed wire rod in the range of Ø8-Ø16. The facility has Turkey’s first TMB (Twin Module Block) system and can perform production with low ovality and high surface quality. The facility has the capability of producing in all quality and norms and has the longest conveyor in Turkey.

More Information
05

Tosçelik Spiral Boru Üretim San. A.Ş.

Spiral Welded Pipe Factory inaugurated in April 2009 with an annual capacity of 400.000 Mtons ,

Our facility has a large production range starting from 16" inch up to 120" inch with a respective maximum wall thickness of 28mm.

Primarily including API standards , all standards, all types of internal and external protective coatings can be applied and all domestic and international specifications can be responded at our facilities which have the latest production technology

Where after accomplished successfully 500 km for Algeria and 400 km gas pipelines , Toscelik Spiral Boru take justified pride to be the major pipe supplier of Trans Anatolian Gas Pipeline Project – TANAP called the energy project of the century by delivering 470km line pipes and continue to be key supplier to domestic market needs by delivering 200.000 Mtons water pipes to Turkish National Water Authority’s for the water supply of Gaziantep – Trabzon and Elazıg cities ,

As a global pipe supplier , finally in April 2018 we have been awarded a pipe supply contact worth 127 million € with Romanian Transgaz for BRUA Gas pipeline interconnector between Bulgaria , Romania , Hungary and Austria,

In scope of BRUA project ; 478kms of gas pipes with a diameter of 32" and pipe joint equipment will be delivered to 14 stock yards through pipe line , annual carriage capacity to be 4,4 bcm.

More Information
06

Tosyalı Çelik Tic. A.Ş.

It is one of our newest companies that operate within the Tosyalı Holding organization.

Our company was founded in 2016 having separated from Tosçelik, and it continues its operations with commercial product sales provided from domestic and international sources. We continuously possess in our stock adequate amounts particularly of HRC materials between 1.2 - 25 mm, in accordance with the production capabilities of our cut to length machines that operate in our steel service centers in Iskenderun, Osmaniye, Dilovası, and Aliağa. We continue to strengthen our relationships with our new customers while our sales specialist colleagues regularly visit the approximately 350 companies in our customer portfolio throughout Turkey. Our biggest objective is to procure our services with rapid and suitable economic conditions by determining the need based on the places of use. We accelerated our export operations with our close neighbors and particularly Africa while continuing down our path with this restructuring in the domestic market. Pursuant to our understanding of quality, we strive to present customer-oriented solutions in negative circumstances that may occur in processes of products and services.

Tosyalı Çelik Ticareti A.Ş. continues to grow in a manner that meets any and all expectations of our customers.

Tosyalı Holding’s playing field is the entire world, as per global economic conditions, and it is in a position of one of the fastest-growing players in the global steel sector with the investments it has made and its cooperation on four continents. We, like all our group companies, aim to increase our work accumulations by providing the maximum benefit from this synergy and to grow by adding new products and services to our organization. Our biggest desire is to soon be among the top 100 corporations in Turkey.

We continue along our road with the motivation to fulfill this desire. We offer our thanks to our stakeholders, especially our company employees and customers, who have supported us on this path.

More Information
07

Tosyalı Entegre Demir Çelik Ürt San. A.Ş.

Investments for Tosyalı Demir Çelik San. A.Ş. were completed in the Iskenderun Organized Industrial Zone between 1993-1994, it added gussets to its production matrix in 1995 and doubled its capacity with its second rolling mill established in 2001.

Our company completed an expansive array of equilateral Equal Angles, IPN, IPE, and UPN production and has continued to serve in the domestic and international markets with the pride of having quality-focused production and being a leader in the sector since its establishment.

Our company can perform production in TS, DIN, EN, and ASTM norms.

More Information
08

Tosyalı Dış Ticaret A.Ş.

Tosyalı Dış Ticaret A.Ş. was established to complete as quickly as possible the import-export processes of the Tosyalı Holding companies, whose foreign trade capacity is rapidly increasing.

Along with successfully expanding its activities and ensuring its continuity, it adopted international principles of quality and provides services in the manner required in the sector and the group.

Our goal is to provide markets for the production and trade our customers do internationally, and it helps conduct market research for them when requested.

Our company never compromises its principles and is ready to provide the best service here on out like it has until now as Tosyalı Foreign Trade by proving itself abroad.

More Information
09

Tosyalı Elektrik Enerjisi Toptan Sat. İth. İhr. A.Ş.

It was established in 2010 to operate in electrical trade. It maintains its operations in the scope of the license number ETS/2824-3/1722 dated 20/10/2010 obtained from EPDK.

More Information
10

Tosyalı Denizcilik ve Liman İşletmeciliği A.Ş.

It was established to implement the Tosyalı Erzin Port project in the Erzin region in 2011.

More Information